Tsunami MP-8100 Installation and Management Guide 92
4.6.2.4 QoS SU List Configuration
1. Click ADVANCED CONFIGURATION > QoS > SU List. By default, the table does not have any entry. User can
configure the Wireless MAC Address of the SU here and associate the QoS Class need to be used for that particular
SU.
Figure 4-36 QoS SU List Entries
2. If an SU is not in the list and is associated, the default QoS class configuration is applied.
Adding a New SU
1. Click Add to add a new entry. The following screen appears for configuring the New SU Entry.
Figure 4-37 SU QoS Table add Row
2. Specify the Wireless Mac Address of the SU, Class Name, Comment and Entry Status and click Add. Previously defined
Class Name is listed in the Class Name drop-down menu.
4.6.3 QoS Configuration for a Management Station
As stated previously, the QoS feature enables prioritization of traffic and allocation of the available bandwidth based on that
prioritization. The system is designed in such a way that higher priority traffic preempts lower priority traffic, keeping lower
priority traffic on hold until higher priority traffic finishes. This mechanism ensures that the available bandwidth is always
given first to the higher priority traffic; if all the bandwidth is not consumed, the remaining bandwidth is given to the lower
priority traffic.
To Next Page
Loading...
