Tsunami
®
800 and 8000 Series - Hardware Installation Guide 7
Audience
The intended audience for this guide is the network administrator who installs and/or manages the device.
Prerequisites
The reader of this document should have working knowledge of Wireless Networks, Local Area Networking (LAN) concepts,
Network Access Infrastructures and Client-Server Applications.
Related Documents
In addition to this guide, you can refer to the following documents that are available on the Proxim’s support site at
[ Y Y S L ^ R S g ^
Quick Installation Guide (QIG) - A quick reference guide that provides essential information to install and configure
the device.
Software Management Guide - A guide that provides step-by-step instructions to configure, manage and monitor
the device by using Web Interface.
Reference Guide - A guide that provides step-by-step instructions to configure, manage and monitor the device by
using Command Line Interface (CLI).
Antenna Guides - A guide that gives insight on the recommended antennas for your product and ways to align the
antennas.
Safety and Regulatory Compliance Guide - A guide that provides country specific safety and regulatory norms to
be followed while installing the device.
MP-826-CPE-50 WD
QB-8100-EPA/LNK US, WD, EU
QB-8150-EPR/LNK US, WD, EU
QB-8150-LNK-100 US, WD, EU
QB-8150-LNK-12 WD
QB-8150-LNK-50 US, WD
QB-8151-EPR / LNK US, WD
QB-8200-EPA / LNK US, WD, EU, JP
QB-8250-EPR / LNK US, WD, EU, JP
QB-825-EPR/LNK-50 US, WD
QB-825-EPR/LNK-50
+
US, WD, EU
Product(s) Supported Countries
To Next Page
Loading...
