Safety
General
l Observe the safety instructions in the VIBSCANNER 2
manual and act accordingly.
l Use the device to measure the signals on machines only in
industrial sectors.
l Install the measuring equipment in accordance with the
applicable safety regulations.
l Comply with the applicable safety regulations when per-
forming measurements on a machine that is in operation. Do
not reach into the machine when it is in operation.
l Use only original accessories.
l Only operate the device and the measuring equipment if
they are in a functionally safe state.
l Repairs must only be carried out by authorized, specialist
personnel.
l It is forbidden to make constructive or safety-related
changes to the device or measuring equipment.
Environment
l Adhere to the permissible ambient conditions.
l Protect the interfaces from contamination.
l Only operate intrinsically safe devices in the Ex-zone.
EN - 6
To Next Page
Loading...
