PRV Audio DSP2.8X - Settings Map; Processor Features

6 7
Settings map
Find the desired conguraon from the illustraon below with all conguraons
and processor features:
Audio Processing
Graphic Equalizer
Presets
Crossover Presets
Save
Load
Copy Channel
Security
Tools
Screensaver
Language
Sequencer
Graphic Input Equalizer
Parametric Input Equalizer
Parametric Output Equalizer
Roung Audio
Crossover
Delay
Phase
Limiter
Gain
Mute
Lock/Unlock
Charge Password
Tone Generator
Frequency Sweep
Pink Noise
Time
ON/OFF
Main Menu
Processor features
GRAPHIC EQ
f: 63 Hz +2.6 dB
PARAMETRIC EQ
freq.: 214 Hz
PARAMETRIC EQ
gain: +3.2 dB
PARAMETRIC EQ
Q: 1.4
• Graphic Input Equalizer
The input graphic equalizer has 15 bands, allowing a variaon of ± 12 dB per
band, with a pitch of 0.1 dB, with frequencies equally spaced in 2/3 octave, in
the range of 25 to 16 kHz in accordance with
ISO requirements . The graphic equalizer
acts on the two inputs simultaneously.
• Parametric Input/Output Equalizer
The parametric equalizer allows you to choose a gain / aenuaon at a specic
frequency, as well as the bandwidth of that equalizer by means of the Q factor,
the smaller the Q the greater the width of that equalizaon band, aecng to a
greater extent the neighboring frequencies .
The DSP2.8X has 9 parametric equalizers distributed as follows, 1 for the inputs
and 8 for the outputs (1 for output).
• Input and Output Routing
The purpose of the roung opon allows you select the audio source A, B or A
+ B (sum) for each output. Turning the ENCODER dial moves the audio source
to the selected route. To select another
channel, quickly press the corresponding
HOTKEY.
ROUTING
IN A+B ---> OUT1