PRV Audio DSP2.8X - Technical Specifications

14 15
• Sequencer
This feature allows you to acvate several products sequenally.
The sequencer has three outputs (S1, S2 and S3) that are acvated and deacvated
sequenally according to the input signal of the remote input (REM IN).
The acvaon interval between each output
can be congured from 0s to 4s.
When the congured me is 0s, the three
outputs will be enabled and disabled at the
same me, aer 3s of the absence of the
remote signal at the input (REM IN).
To connect the remote signals, use cables of
at least 20 AWG.
It is possible to turn ON/OFF each
sequencer output independently.
When the output is turned o, it will not
trigger when the processor is turned on
again.
MAIN MENU
Sequencer
SEQUENCER
ON/OFF
SEQUENCER
S1: ON
SEQUENCER
Time
SEQUENCER
Time : 2.0 s
AMPLIFIER 1
AMPLIFIER 2
AMPLIFIER 3
Rádio / Player
Baery
STETSOM
Example of installing the "SEQUENCER" feature:
Technical specications
Number of Channels:
Graphic Equalizer:
Graphic Equalizaon Presets:
Parametric Equalizer:
Crossover with Variable Frequency:
Crossover Presets:
Roung between Inputs and Outputs:
Alignment:
Phase Inversion:
Limiter:
Master Level and Gain:
Memory Posions Save/Load:
Safety:
Frequency Generator:
Frequency Sweep:
Pink Noise Generator:
Screensaver:
Languages:
Latency:
Input Impedance:
Output Impedance:
Max. Input and Output Voltage:
Max. Output current (SEQUENCER):
Saturaon Indicator:
Signal-to-noise rao:
Total Harmonic Distoron (T.H.D):
Channel Separaon:
Frequency Response:
Power supply:
Max. Current Consumpon:
Dimensions (W x H x D):
Weight:
Input: 2 / Output: 8
15 Bands (gain ±12dB)
12
1 Input + 1 per Output (gain ±12dB, Fator Q 0.4 ~ 10.0)
Buerworth: 12/18/24/36/48 dB/8ª
Linkwitz-Riley: 12/18/24/36/48 dB/8ª
11
A, B or A+B
0 ~ 8ms (275cm)
0° ~ 180°
Threshold: -24 ~ 0dB / Aack: 0.1 ~ 100.0ms and
Release: 1 ~ 1600ms (manual/automac)
0 ~ 100% (Gain -45 ~ +15dB per output)
Autosave + 4 slots
Password with 4 digits
10Hz ~ 22kHz, Level -60 ~ 0dB
Freq. inial and nal 10Hz ~ 22kHz
(Level -60 ~ 0dB and Speed control)
10Hz ~ 22kHz and Level -60 ~ 0dB
Editable text with 15 characters
Portuguese, English and Spanish
1,08ms
10 kΩ
47 Ω
5,6 Vpp (+8,2 dBu)
180 mA per output
1 per input + 1 per outpu (linked to the Limiter)
>90dB
<0,01%
>80dB
10Hz ~ 22,5kHz @ -1dB
10V ~ 15V DC
450mA @ 12,6V DC
37 x 200 x 101 mm
460g