PS Audio Stellar Strata - Analog 3 Fixed Volume

Stellar Strata Amplier
Operation Guide
®
19
Menu Features
(Continued)
Analog 3 Fixed Volume
e Fixed Input feature allows you to congure Analog Input #3 to always have the same xed
volume setting. is is useful if you are using the Stellar Strata Amplier to power the front
channels in a surround sound system. In this conguration, the output of your surround receiver
would be connected to Analog Input #3. Set the Fixed Input volume setting to match your other
speakers. When Analog Input #3 is selected the volume control on the Strata will be locked and
you will control the volume using your surround receiver. If this value is anything except OFF,
then you may also use the HT button on the remote to activate Analog Input #3.
System sub-menu (double click to open)
Trigger Delay
is feature allows the trigger output to be delayed a period of time aer the Strata is activated.
e time delay can be adjusted from 0 to 60 seconds.
Backlight
e brightness of the display can be adjusted to suit your room lighting any your tastes. e
range is from 1 to 10.