15
Rev 2.0 2023-10-23
11. # Button
For multiple functions. Typically used
when calling shortcuts
12. Multiple Function Buttons.
You can use this remote to control the auto-tracking functions of PTZOptics cameras that
support auto-tracking, but these functions will not function for the Studio Pro Camera.
Function 1: Auto Tracking Control
▪ [F1]: Enable video-based auto-framing (Studio Pro nonfunctional)
▪ [F2]: Enable audio-based auto-tracking (Studio Pro nonfunctional)
▪ [F3]: Enable video-based auto-tracking (Studio Pro nonfunctional)
▪ [F4]: Disable auto-tracking (Studio Pro nonfunctional)
▪ [F4]: When the IR remote is on the same IR channel as the Studio Pro, pressing the [F4]
button will pause the video feed. Pressing the [F4] button again will play the video feed.
Function 2: For setting camera IR address.
Press these 3 keys one after another to set the
camera IR address as follows:
[*] > [#] > [F1]: Address 1
[*] > [#] > [F2]: Address 2
[*] > [#] > [F3]: Address 3
[*] > [#] > [F4]: Address 4
Function 4: Image Freeze
• [#] > [*] > [F4]: Freeze the video feed. Repeat to unfreeze. (Studio Pro nonfunctional.
This feature is only available for PTZOptics cameras that support auto-tracking)
13. Menu Button
Press to enter the camera’s On Screen Menu (OSD)
[MENU]: Open or close the On Screen
Display menu
14. Backlight Button
Use to enable or disable backlight
compensation.
Note: Only eective in auto exposure
mode.
Note: If there is light behind the subject,
they may appear darker. In this case, use
Backlight Compensation to enhance image.
15. P / T RST Button
Perform camera self-calibrate pan and tilt
movement. (PTZ Cameras Only)
To Next Page
Loading...