PTZOptics Studio Pro

To Next Page

To Previous Page

™

Rev 2.0 2023-10-23

• Firmware Check

Ŝ Mirrors: Dene a server address for acquiring the latest PTZOptics rmware les. By

default, the camera will query PTZOptics at https://rmware.ptzoptics.com/

Ŝ Check Firmware Version: Check to see if your camera is running the latest rmware

from the Firmware Update Server.

• Firmware Upload

Ŝ File Upload (Advanced): Select a rmware le from your PC to upload to the

camera.

• Restore Default

Ŝ Menu Reset (Basic): Reset the camera’s non-network settings to factory default.

Ŝ Network Reset (Advanced): Reset the camera’s network settings to factory default.

Ŝ Factory Reset (Advanced): Reset all of the camera’s settings to factory default.

For more information you can scan the QR code below or visit ptzoptics.com/get-

started.

PTZOptics Studio Pro - Page 52