Puck KEYSAFE - Mounting; Mounting on a brick or concrete wall

7
3 Mounting
The Puck Keysafe can be mounted in two
ways:
1. Mounting on a brick or concrete wall.
2. Mounted on the frame of a door.
3.1 Mounting the Puck Keysafe on a
brick or concrete wall
attention
• Mounting should preferably be
performed by a qualified installer.
• The wall where the safe is to be
mounted must be flush.
• The wall must be made of brick or
concrete.
To mount the Puck Keysafe on a wall, do
the following:
1. Open the Puck Keysafe. The code is
factory preset to 0000.
• Using the number wheels enter the
code '0000'.
• Turn the lid anti-clockwise and then
pull it toward you.
2. Determine where you want to mount
the Puck Keysafe. The height must be
120-150 cm.
3. Keep the mounting place to the desired
location so that two holes are facing up
and one hole is facing down.
Figure 5. Position the Puck Keysafe
120-150 cm