Puhui HH-G01 - 重要事项 Important Notice; 技术参数 Technical Parameters; 功能介绍 Function Introduction

1. 重要事项 IMPORTANT NOTICE
在使用雕刻机前，请认真阅读该使用说明。
Read these instructions BEFORE operating the machine.There are a few things that must be done before
connecting the machine to any power source.
该设备需要连接无油无水的气源，建议使用无油静音空压机。若您现有的空压机不是无油设备，请在连接雕刻机前加装油水
过滤装置。
This machine requires clean, dry, oil-free air. We suggest using an oil free compressor. If your compressor is an oil
type, you MUST have an oil removal filter (coalescing type) in the air supply line to this machine. If you are unsure of
this requirement, please contact your salesman.
2. 技术参数 TECHNICAL PARAMETERS
3. 功能介绍 FUNCTION INTRODUCTION
pic.1