1514
6. INSTRUCTIONS FOR USE
IMPORTANT! Do not use the cleaner if the motor housing is damaged.
Fitting Your Backpack
Your Backpack comes with straps fastened for ease of packing. Before fitting the Backpack
onto your back, first loosen the various harness straps.
1. Adjust harness height to your body height by squeezing
& sliding the Height Adjust Plate (up or down) to your
appropriate height (Tall, Medium or Small).
2. Ensure your arms are through the harness. Buckle the hip
belt ensuring the backpack is resting on your hip bone.
Tighten by pulling both the hip belt side straps.
3. Tighten the shoulder straps by pulling down on the end of
the two straps, as shown.
4. Pull down on the two Load Lifter Straps.
5. Lastly buckle the Sternum Strap across your chest.
IMPORTANT
The unit is ergonomically correct when the weight is distributed
over the waist and not on the shoulders.
To Next Page
Loading...
Need help?
General
