Pullman WD20LSSO - Hose Connection and Operation; Connecting Hose for Vacuuming; Connecting Hose for Blower; Starting the Cleaner

ASSEMBLY (WITH HOSE)
1. (a) For vacuuming, insert the hose end into the hose
inlet. Turn clockwise to lock the hose in place.
2. Start the cleaner by pressing the On/Off switch.
IMPORTANT! The On/Off switch is equipped with a water-proof cover. If the
water-proof cover is broken, please contact your nearest Pullman agent for
service/repair.
Part 2
(b) For blower function connect the hose end into
the blower port. Turn the hose clockwise to lock
the hose in place.
11
PULLMAN 20L WET & DRY VACUUM WITH OUTRIGGER WD20LSSO