Pullman WD20LSSO - Cable Restraint Assembly; Connecting Extension Cord; Feeding Cord Through Restraint; Locking Cord on Hook

ASSEMBLY (CONTINUED)
Cable Restraint
IMPORTANT – ENSURE EXTENSION CORD IS FITTED TO THE RESTRAINT CORRECTLY
AND THAT THE RESTRAINT IS FITTED TO THE TROLLEY PROPERLY.
1. Connect extension cord to the cable on
the machine. Make a loop at 40cm on the
extension cord.
2. Feed loop up through cable restraint opening.
3. Place extension cord over top of hook.
Pull down on cord to lock on hook.
4. Pull down on the extension cord firmly to
ensure it does not slip.
9
PULLMAN 20L WET & DRY VACUUM WITH OUTRIGGER WD20LSSO