Pullman WD20LSSO - Assembly with Gulper Outrigger (Continued); Installing Fixed Support; Inserting Gulper Floor Tool; Securing Gulper Floor Tool

2. Install the fixed support pre-assembly onto the
cleaner and connect the bend tube assembly.
3. Insert the Gulper Floor Tool into the
Outrigger Assembly.
4. Turn locker to the left to secure the Gulper
Floor Tool.
5. Once assembled as per diagram, start the cleaner
by pressing the On/Off switch.
ASSEMBLY (WITH GULPER OUTRIGGER)
Part 2 (Continued)
8