11PULLMAN 30L WET & DRY VACUUM WD30BV1
MAINTENANCE
1. Release the locking latches to remove the canister lid.
3. Remove the dust bag.
4. Empty the tank and clean the inside of it thoroughly, use
luke warm water only.
2. Unlock the locking knob and remove the HEPA filter.
ATTENTION: DISCONNECT FROM MAINS POWER SUPPLY BEFORE DOING
ANY MAINTENANCE WORK. IF PROPER CARE IS TAKEN TO MAINTAIN YOUR
CLEANER, MOTOR MAINTENANCE IS UNNECESSARY.
HOWEVER WE RECOMMEND THAT YOUR CLEANER IS SERVICED ONCE A YEAR.
To Next Page
Loading...
