English
16
SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION
NOTES ON OPERATING THE WATCH
● When the stopwatch is or has been measuring, if the crown is pulled out to the second
click, it will automatically reset the STOPWATCH hands to “0”.
● If the alarm has been set and the crown is pulled out to the second click, the ALARM
hands will turn to indicate the current time.
[MAIN TIME SETTING]
● When setting the hour hand, be sure to check that AM/PM is correctly set. The watch
is so designed that the date changes once in 24 hours.
● When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time
and then turn it back to the exact minute.
SETTING THE DATE
● It is necessary to adjust the date at the end of February and 30-day months.
● Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not
change properly.
● Do not press button B when the crown is at the first click position, as this will move the
ALARM hands.
To Next Page
Loading...
