must close the lens cover before calibrating manually.
7.
Select the required amplification level (“Normal” , “High”
, “Ultra” ) by briefly pressing the UP (5) button.
8.
Enter the main menu with a long press of the MENU (4) button and select the
desired color palette (for more details see theColour Modessection).
9.
Activate the quick menu by briefly pressing the MENU (4) button to adjust the
brightness, contrast and smooth digital zoom (for more details see the Quick Menu
section).
10.
After use, turn the device off by a long press of the ON/OFF (6).
Warning!Never point the lens at intensive energy sources such as laser radiation
emitting devices or the sun. It can damage electronic components in the device. The
warranty does not cover damage arising from failure to comply with operating
instructions.
To Next Page
Loading...
Need help?
General