To turn on and off the PiP function see the PiP Mode section.
Press and hold the UP (5) button to change the magnification ratio in the PiPwindow.
The zoomed image is displayed in a dedicated window, while the image in the rest of
the screen is displayed at base magnification (2x).
When the PiP is turned on you can control both the discrete and smooth digital zoom.
In this case the zoom value changes only take place in the dedicated window.
When the PiP function is turned off, the screen will display at the magnification
that was set in PiPmode.
To Next Page
Loading...
Need help?
General