Pulsar HELION 2 XP50 User Manual

Lift up the lever (7). Remove the battery (5) from the charging pad.
Lift up the battery locking the lever (6).
Insert the battery (5) as far as it will go into the slot of the device body designed for it so that the F part is at the
bottom.
Lock the battery by lowering the lever (6).
Stream Vision App
Download the Stream Vision app to stream the image via Wi-Fi from the display of your device to a smartphone or
tablet. Detailed instructions are available on the Internet at: www.pulsar-vision.com

Pulsar HELION 2 XP50 Specifications

General

Sensor Resolution	640x480
Pixel Pitch	17 µm
Display Type	AMOLED
Display Resolution	1024x768
Magnification	2.5 - 20x
Detection Range	1800 m
Frame Rate	50 Hz
Waterproof Rating	IPX7
Objective Lens	F50/1.2
Dimensions	234x55x58 mm
Built-in Memory	16 GB
Thermal Sensitivity	<40 mK
Field of View	12.4° x 9.3°
Digital Zoom	4x
Power Supply	Li-Ion battery
Operating Temperature	-25°C to +50°C
Video / Photo Resolution	640x480
Video / Photo Format	MP4 / JPG
Battery Life	8 hours