Pulsar KRYPTON 2 - Page 55

When the  Display Off  function is activated , video recording continues to run in the
background .
Wi-Fi Function
The device has a function enabling wireless communication with external devices
( smartphone or tablet ) via Wi - Fi .
Turn on the wireless module in the  Wi - Fi Activation menu option ( see the Wi -
Fi section ).
Wi - Fi is displayed in the status bar as follows :
Connection Status Indication on the status bar
Wi - Fi is switched off
Wi - Fi connection is in progress
Wi - Fi is switched on , no connection with device
Wi - Fi is switched on , device connected
The device is recognized by an external device as KRYPTON 2_ XXXX where XXXX
are the four last digits of the serial number .
After entering the password on the external device ( see the  Password Setup
subsection of the Wi - Fi section for more information on setting a password ) and
setting up a connection , the icon in the status bar changes to .
The Wi - Fi function will turn off automatically if there is not enough battery power for
Wi - Fi . The battery icon will turn red  and flash . To use the Wi - Fi function again ,
you need to charge the battery .
Display-O Function