Pulsar KRYPTON FXG50 - Installing the Battery Pack; Battery Precautions and Recommendations; External Power Supply; Operation and Installation

ENGLISH
Description of buttons function
BUTTON SHORT PRESS LONG PRESS
ON/OFF (9)
Turn on device /
Turn on display /
Device calibration
Turn off device /
Turn off display
MODE (8)
Switch observation modes /
Menu navigation down/left/
counterclockwise
Turn on / off the Black
Hot palette
MENU (7)
Enter quick menu /
Switch between quick menu items /
Conrm selection
Exit quick menu /
Enter/exit main menu
REC (6)
Start/pause/resume video recording
/ Photography /
Menu navigation up/right/clockwise
Toggle between photo
and video mode /
Stop video recording /
Charging battery pack
•
Lift up the lever (4) of the Charger.
•
Insert the Battery Pack (5) into the Charger until it stops; lock the Battery by
lowering the lever (4).
•
Connect the microUSB plug of the USB cable (22) to the microUSB port (21) of
the charger.
•
Connect the second plug of the USB Cable (22) to the Power Adapter (23).
•
Plug the Power Adapter (23) into a 100-240 V socket (24).
•
Disconnect the Power Adapter (23) from the mains after the Battery is fully
charged (green LED light stays on continuously).
Open
Close
5
18
2 20 6 11 12
4
3
19
7
1715
10 1
16
8 9
13
14
2