The blade is sharp. Contact with the blade can result
in serious personal injury.
• Disconnect the spark plug cable.
• Wear heavy gloves when servicing the blade.
8
Replacing the Blade
Service Interval: Yearly
Important: You will need a torque wrench to install the
blade properly. If you do not have a torque wrench or are
uncomfortable performing this procedure, contact an
Authorized Service Center.
Examine the blade whenever the mower runs out of fuel.
If the blade is damaged or cracked, replace it immediately.
If the blade edge is dull or nicked, have it sharpened or
replace it.
Figure 14
2. Replace the air filter. (Figure 15)
Figure 15
3.
Install the cover.
4. Install new blade with all mounting hardware; tighten
blade bolt by turning clockwise.
5.
Replacing the Air Filter
Service Interval: 25 Hours
1. Lift the right-side tab to open the air filter
cover.(Figure 14)
Figure 16
Open the
cover
Install the
cover
Figure 17
To Next Page
Loading...
