11
ASSEMBLY
Assembling The Handle
As shown in Fig 3&4
1. Fasten the lower handle to
the mower deck by using two bolts and
two small knobs on each side. Fig. 3
2. Unfold the upper handle and attach it to the lower handle.
Secure it by using two bolts and two small knobs. Fig 4
Tidy The Connection Cord
As shown in Fig 5
Clip the connection cord to the handle
with the cord clip (supplied).
Make sure the rope guide is on the right
handle, when you stand behind the mower.
NOTE!
Fig 3
Washer
Bolt
Knobs
Fig 4
Bolt
Knob
Washer
Fig 5
Clip
To Next Page
Loading...
