15
ADJUSTMENT
Setting The Cutting Height
As shown in Fig
14
The cutting height is centrally adjusted with the cutting height adjusting handle.
Different cutting heights can be selected.
Pull the adjusting handle out and select the desired cutting height.
The handle snaps into the desired position.
From position 1 to position 7.
Setting Required Function
Adjust the cutting height only
when the engine is shut off and the spark
CAUTION!
plug boot has been pulled.
This lawn mower has three functions. These functions can be converted by changing
accessory setting. Please see the following chart for detail setting.
CAUTION!
TO CONVERT MOWER MULCHING PLUG GRASS BAG SIDE DISCHARGE
For rear bagging × √ ×
For mulching √ × ×
For side discharging √ × √
“√”: installed “×” :removed
Fig
14
To Next Page
Loading...
