CZ/SK/EN
30
14 EU Declaration of conformity
Translation of the original EU Declaration of conformity
Product model: PC-18(1), PC-58(2), PC-59(2)
Manufacturer. PUMPA, a.s., U Svitavy 1, 618 00, Brno, Czech Republic, ID No.: 25518399
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Subject of the declaration: flow sensor(1), pressure sensor(2)
The object of the declaration complies with the relevant harmonisation legislation of the European Union:
Directive 2014/35/EU and Directive 2014/30/EU
The harmonised standards on the basis of which the declaration of conformity is made have been used:
EN 60730-1 ed.4: 2017
EN 60730-2-6 ed.3:2016
EN 55014-1 ed.4: 2017
EN 55014-2 ed.2: 2017
EN 61000-3-2 ed.5: 2019
EN 61000-3-3 ed.3: 2014
Declaration issued on 17.12.2020, in Brno
ES/PUMPA/2019/001/Rev.1
To Next Page
Loading...
