Pure Reliability SOLO 250 User Manual

SOLO 250
PR-2255
This product manual contains important information about the safe installation and
use of this projector. Please read and follow these instructions carefully and keep this
manual in a safe place for future reference.
PR LIGHTING LTD.
Yingbin Road, Dashi Panyu, Guangzhou, 511430 China
http://www.pr-lighting.com

Pure Reliability SOLO 250 Specifications

General

Brand	Pure Reliability
Model	SOLO 250
Category	Flood Light
Language	English

Summary

Safe Usage of the Projector

Installing the Projector

Fitting the Lamp

Instructions for replacing the projector lamp, including safety and alignment.

Power Supply - Mains

Control Connections

Details on DMX512 connection, wiring, and daisy-chaining projectors.

Setup Options - Projector Configuration

5-Pin and 3-Pin Conversion

Guide for converting 5-pin XLR to 3-pin XLR for DMX control.

DMX Terminator

Explanation of using a DMX terminator to prevent signal corruption.

To Set the DMX Start Address

DMX Control Channel Functions

Stand-Alone Mode & Master/Slave Mode

Changing the Gobos

Step-by-step guide on how to replace gobos in the projector.

Lubrication

Recommendations for lubricating moving parts for smooth operation.

Maintenance

Keeping the Projector Clean

Guidelines for cleaning the projector optics, fans, and filters.

Troubleshooting

Common problems, their causes, and recommended solutions.

Technical Data

Electrical Diagram

Component Order Codes

Changing the Operation Voltage and/or Frequency