PURE EVOKE-2S - Safety Instructions

2
Unclip the aerial from the clip on the rear of the radio and fully extend it (A and B).
Insert the supplied mains cable into the socket on the rear of the radio (C).
Connect the mains plug to the mains supply (D), make sure the power switch (E) is on
and press the Standby button.
Wait for EVOKE-2S to complete an Autotune for all available DAB stations (this takes
about a minute). When the Autotune is complete, a station will be selected.
Getting started
Quick set up
Getting started
EcoPlus
EcoPlus
Aux In
Line Out USB
B
A
C
D
EcoPlus
EcoPlus
Aux In
Line Out USB
E
0
I
0
I
0
I
0
I
PURE EVOKE-2S 52
Now tuning...
1
Talking to the people wh
BBC Radio 2
Energy saving
enabled
(> page 12)