7
Setting the alarm & timers
Setting the alarm
EVOKE-2S has an alarm which switches the radio on (if in standby mode) and tunes to a DAB or
FM radio station, or sounds an alarm tone.
1. Press the
(Alarm/Timer) button and select ‘Alarm’ to display the alarm status screen.
2. Push the Tune dial to select ‘Set alarm’, scroll to ‘Alarm on’ and push the Tune dial to select.
The alarm is now active.
3. Push the Tune dial to select ‘Set time’. To set the time you want the alarm to sound turn the
Tune dial to adjust the hours and then push to confi rm. Repeat to adjust the minutes.
4. Push the Tune dial to select ‘Set days’. Choose when you want the alarm to repeat (turn the
Tune dial to browse through the options and push to select).
Daily Every day
Weekday Monday – Friday, every week
Weekend Every weekend
Saturday Every Saturday
Sunday Every Sunday
Once only The alarm will sound at the time you have selected and not repeat.
5. Push the Tune dial to select ‘Set mode’ and choose the type of alarm you want to sound:
DAB, FM or Tone. If you select ‘Tone’, there are no further options.
6. For DAB and FM alarms only, push the Tune dial to select ‘Select station’ and choose which
DAB or FM radio station you want to sound for the alarm.
For DAB alarms
Select a DAB station from the station list.
For FM alarms
Choose between ‘Last tuned’ or an FM preset station. If you select ‘Last tuned’ the alarm will
tune to the last FM station you listen to before the alarm sounds.
Tune
08:00 set hour
07:00
Tune
If you want to set
a ‘one-off’ alarm
choose ‘Once only’.
Tune
Tune
Tune
Set alarm
Alarm off
Alarm on
Alarm off
Setting the alarm & timers
ENEN
To Next Page
Loading...
