PURE EVOKE-2S - Getting Started; Quick Setup Guide

4
•Unclip the aerial and fully extend it (steps A and B).
• Insert the supplied mains cable into the socket on the rear of the radio (C).
• Connect the mains plug to the mains supply (D), make sure the power switch
(E) is on and press the Standby
button.
Wait for Evoke 2S to complete an Autotune and find all available digital
stations. When the Autotune is complete, a station will start playing.
Getting started
Quick set up
Aux In
Line Out USB
B
A
C
D
Aux In
Line Out USB
E
0
I
0
I
0
I
0
I
Talking to the people wh
BBC Radio 2
Pure is displayed briefly on-screen.
Pure Evoke-2S 52
1
2
3
EVOKE_2S_manual_UK-Aus.indb 4 7/13/2012 4:29:27 PM