Need help?Do you have a question about the PURE Evoke D4 and is the answer not in the manual?
General| Radio type | Portable |
|---|---|
| Tuner type | Digital |
| FM band range | 87.5 - 108 MHz |
| PLL synthesizer | No |
| Auto digital tuning | Yes |
| Supported radio bands | DAB, DAB+, DMB-R, FM |
| Preset stations quantity | 30 |
| RMS rated power | - W |
| Speaker type | 1-way |
| Number of built-in speakers | 1 |
| Subwoofer driver diameter (imperial) | 3 \ |
| Display type | OLED |
| Display resolution | 128 x 22 pixels |
| Display number of colors | Monochrome |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Material | Plastic, Wood |
| Product color | White |
| Input voltage | 110-230 V |
| Power supply type | AC/DC |
| Apple docking compatibility | Not supported |
| Power source | DC/Battery |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 3.5 W |
| Power consumption (typical) | 0.8 W |
Weight and Dimensions| Depth | 115 mm |
|---|---|
| Width | 217 mm |
| Height | 180 mm |
Options for registering your purchase online or keeping proof of purchase for warranty service.
Pure agrees to refund, repair, or replace defective parts within the warranty period.
Instructions on contacting Pure for warranty service or submitting a claim online.
Lists items and conditions not covered, such as wear and tear or accidental damage.
Details consumer rights under Australian law, additional to the express warranty.
Identifies and briefly describes the main controls located on the front of the Evoke D4.
Details the input and output connectors found on the rear of the Evoke D4 unit.
Explains the basic functions and buttons of the supplied remote control.
Essential guidelines for safe operation, including placement, environment, and avoiding liquids.
Warnings about mains adapter usage, battery handling, and electrical insulation.
Advice on preventing hearing damage from high volume and safe usage during activities.
In-depth explanation of each button, dial, and sensor on the Evoke D4's front panel.
Details the 9V DC power, Aux In, and USB ports located on the rear of the device.
Explains the functions of the volume, preset, and select buttons on the remote control.
How to increase, decrease, and mute the sound volume using the dial or remote.
Guide on selecting between digital radio, FM radio, and auxiliary input.
How to change the displayed information like scrolling text, time, or signal quality.
Step-by-step instructions for initial setup, including aerial, power, and language selection.
How to browse and tune into available digital radio stations using controls.
Methods for tuning FM stations, including seek and manual frequency adjustment.
How to pause, scroll, and exit scrolling text information displayed on screen.
How to save a current station to one of the first four preset buttons.
Steps to store stations into the complete preset list from 1 to 15.
How to tune into previously stored radio stations using presets.
How to set, activate, cancel, and snooze alarms for waking or reminders.
How to customize the duration of the snooze function for alarms.
Instructions for setting and using the countdown timer for kitchen tasks.
How to configure the radio to turn off automatically after a set period.
How to scan for and add new digital radio stations.
Options to select FM stereo/mono reception and choose tuning modes.
How to change the menu language and reset the device to factory defaults.
Instructions for checking the current software version on the unit.
Guide on how to update the device firmware via a PC connection.
How to manually set the time and date if automatic sync fails.
How to select the preferred display format for time (12/24 hr) and date.
How to configure sources used for automatic time synchronization.
How to set the screen brightness level for active and standby modes.
How to set the screen timeout duration for when the unit is active or in standby.
Steps for fitting the ChargePAK and initial charging recommendations.
Explains secondary services, inactive stations, and troubleshooting 'No stations available'.
Addresses a dark screen and how alarms behave when using ChargePAK.
Guide on performing a factory reset to restore default settings.
Instructions for responsible recycling and disposal of the product.
Legal information regarding the publication, company, and product names.
Details the two-year warranty coverage and conditions for defects.
A legal disclaimer concerning the content and accuracy of the manual.
To Next Page
