14
General settings
Changing your preferred language
You can select the language that your Evoke uses for menus and options.
1. Press Menu.
2. Turn and press the Select dial to choose ‘Settings’.
3. Turn and press the Select dial to choose ‘Language’.
4. Turn and press the Select dial to select a menu language from ‘English’, ‘French’, ‘German’ or
‘Italian’.
Carrying out a factory reset
Resetting your Evoke removes all presets, stored stations, alarms and resets all other options to default
settings.
1. Press Menu.
2. Turn and press the Select dial to choose ‘Settings’.
3. Turn and press the Select dial to choose ‘Factory reset’.
4. Turn and press the Select dial to select ‘Yes’ to reset Evoke to factory settings. Select ‘No’ if you do
not want to reset your Evoke to factory settings.
Displaying the software version
To display the software version:
1. Press Menu.
2. Turn and press the Select dial to choose ‘Settings’.
3. Turn and press the Select dial to choose ‘SW version’.
Updating Evoke’s software
Software updates for your Evoke may be made available in the future. If you register your product and
include a valid e-mail address you will receive notification of software updates (register at www.pure.com/
register). Alternatively, visit http://support.pure.com at any time to check for available software updates.
To update your software
Connect your radio to your PC using a suitable A-to-mini B type USB cable. Follow the instructions
provided with the software download at http://support.pure.com
Note: USB update requires a PC running Windows or a Mac running MAC OS 10.6 or above and a
suitable USB cable (not included).
EVOKE_D4_Euro.indb 14 9/3/2013 3:15:00 PM
To Next Page
Loading...
