EasyManuals Logo

PURE Pop Midi with Bluetooth User Manual

PURE Pop Midi with Bluetooth
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
22
Technical specifications
Radio Digital and FM radio
Frequencies
DAB/DAB+, FM radio 87.5-108 MHz
Bluetooth Built-in Bluetooth with A2DP support
Speaker
Full-range 3
" drive unit
Audio power output
4.3W RMS
Input connectors
5.5V DC power adaptor socket (230V supplied)
Output connectors
3.5mm ster
eo headphone socket
Presets 10 digital radio and 10 FM radio presets
Power supply 230V AC to 5.5V (2.0A) DC external power adapter
(supplied), optional ChargePAK D1 rechargeable battery
pack or four AA batteries)
Power consumption
(Standby mode) - 0.5W (limit 1W)
Networked Standby mode activated - Automatic after no
Bluetooth detected
Power Consumption (Networked Standby mode) – 1.0W
Wireless Network(s) On/Off switch - Only single Bluetooth
wireless network connection and the network connection is
always activated
Standby And/Or Of
f mode activated – Standby mode, press
the large cir
cular button/knob so that it is in the ‘down’
postiion and level with the top panel
Dimensions 93 mm wide x 173 mm high x 102 mm deep
Aerial
Telescopic aerial
Approvals CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
The Declaration of Conformity may be consulted at:
http://www.pure.com/R&TTE-DoC.
ETSI EN 300 401 compliant
Australian C-Tick N1600 and Electrical Safety

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PURE Pop Midi with Bluetooth and is the answer not in the manual?

PURE Pop Midi with Bluetooth Specifications

General IconGeneral
Radio typePortable
Tuner typeDigital
FM band range87.5 - 108 MHz
PLL synthesizerNo
Supported radio bandsDAB, DAB+, DMB-R, FM
Preset stations quantity20
RMS rated power4.3 W
Number of built-in speakers1
Subwoofer driver diameter (imperial)3 \
Display typeLCD
Input voltage5.5 V
Bluetooth profilesA2DP
Apple docking compatibilityNot supported
Headphone connectivity3.5 mm
Product colorBlack, Silver, White
Power sourceAC/Battery
Power consumption (standby)0.55 W
Power consumption (typical)0.92 W
Compatible battery sizesAA
Number of batteries supported4
Weight and Dimensions IconWeight and Dimensions
Depth102 mm
Width93 mm
Height173 mm

Related product manuals