Edition from 23.11.2017
5
PLD880. Stepper motor driver
www.purelogic.ru8 (800) 555 63 74
03. Technical features
Fig. 1. Stermotor driver PLD880 dimensions
In order to ensure optimal thermal conditions of installation of the
equipment inside the rack CNC control must be carried out, adhering
to the scheme below:
Installing environmental conditions
1) Working environment temperature: 0~45 °C.
2) Work environment humidity: lower than 40~80% (non condensing).
3) Storage environment temperature: -40~55 °C.
4) Storage environment humidity: lower than 80% (non condensing).
5) Vibrate: lower than 0.5G.
6) Avoid direct sunlight.
7) Prevent oil mist, erosion of salt.
8) Prevent corrosive liquid, gas.
Driver installation and ventilation
04
To Next Page
Loading...