Why is there odour or particles in exhaust air from my Purex iFume 200, even without machine alerts?
The exhaust monitor unit inside your Purex Air Cleaner might have a fault. Begin by inspecting all cables and connections. If the issue continues, contact your supplier.
What to do if Temperature (red) alert appears on Purex iFume 200 Air Cleaner?
If a Temperature (red) alert appears, first ensure that nothing is blocking the cooling vents located at the rear of the extractor. Then, check the process temperature and turn off the extractor.
What to do if Temperature (yellow) alert appears on Purex iFume 200?
If you receive a Temperature (yellow) alert, check that the cooling vents on the rear of the extractor are free from obstructions. Also, check the process temperature.
What to do if my Purex iFume 200 screen is not illuminated?
If the screen is not illuminated, there could be several reasons: * The power supply might be absent or incorrect. Check all cables and connections, ensuring the power supply matches the machine's requirements. * The circuit breaker might have tripped. Try resetting the breaker on the rear of the machine. * The control PCB inside the machine may have developed a fault. Check all cables and connections first. Then contact your supplier.
What to do if Particulate (red) alert appears on Purex iFume 200?
If a Particulate (red) alert appears on your air cleaner, replace the main filter.
What to do if GAS (red) alert appears on Purex Air Cleaner?
If a GAS (red) alert appears, you should replace the main filter.
Why does my Purex iFume 200 filter have a shorter than expected life?
A shorter than expected filter life may be due to: * A problem with the pre-filter. Check the pre-filter for damage or if it is missing. * Changes in the process or its duration, including the use of different materials. Investigate any changes in these factors. If the issue continues, contact your supplier.
What to do if Particulate (yellow) alert appears on Purex iFume 200?
If you see a Particulate (yellow) alert, order a replacement main filter.
What to do if GAS (yellow) alert appears on Purex iFume 200 Air Cleaner?
If a GAS (yellow) alert appears, order a replacement main filter.
What to do if the Purex iFume 200 control signal to/from interfaced equipment is incorrect?
If the control signal to or from interfaced equipment is incorrect, and the equipment isn't switching on and there's an alarm, it indicates an electrical problem. Check all cables, connections, and the interfaced equipment.
General| Brand | Purex |
|---|---|
| Model | iFume 200 |
| Category | Air Cleaner |
| Language | English |
To Next Page
