SET UP & USER GUIDE
9
4. I saw my monitor LED flash green after I put batteries in my monitor.
What does this mean?
A green light means that a software update has been downloaded
and is ready to install. The system will automatically install the update.
Once the flashing stops you are ready to use the monitor. Please leave
the monitor powered on while the software update is in process.
Updates generally take 2-3 minutes.
SAFETY INFORMATION
PRECAUTIONS AND GUIDELINES FOR SAFETY AND BEST RESULTS
If at any time you encounter any malfunction, overheating or other issue with
a monitor, please immediately cease using the monitor, turn it off (if safely able
to do so) and contact our Customer Support team by calling 866-979-2477 or
filling out the “Contact Us” form on the petivity.com Support page.
Keep these Precautions and Guidelines in an accessible location for future
reference, if needed.
Battery Information
• Please use alkaline AA batteries only. Do not use rechargeable or
lithium or other non-Alkaline batteries. Do not mix old and new
batteries or batteries from different brands. Dispose of batteries
in accordance with local guidelines.
• Please monitor condition of batteries and remove/replace if
showing signs of decay or corrosion.
• Please follow the directions to ensure proper installation of battery
door & screws. If not properly installed, battery compartment
screws or door can pop out if dropped or damaged. Batteries and
screws can become a choking hazard to animals and children. If
battery compartment door is lost, misplaced or damaged, contact
our Customer Support team by calling 866-979-2477 or filling out
the “Contact Us” form on the petivity.com Support page.
To Next Page
Loading...