EasyManua.ls Logo

Purple Ascent Adjustable Base - Unpacking and Initial Setup; Leg Installation

Purple Ascent Adjustable Base
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
1
We’ve made the setting up of your Purple Ascent Adjustable
Base as easy as possible so you can begin relaxing in less than 15
minutes! Do not attempt to set up the base by yourself. Always
set up with the help of an additional, able-bodied person.
Remove the binding straps and packing materials, making sure
not to puncture the box with any sharp objects.
INSTALLATION GUIDE
Remove the bed base from the box and
unfold it so that the bottom of the base
is facing upwards.
When removing the bed base from the
box, be cautious of pinch points and
dropping hazards. Use two people to
safely unfold the base.
Remove the twist ties holding the
retainer bar and set the retaining bar
aside
To install the legs, screw the bolt of the
leg into the threaded holes. Tighten by
hand. Repeat on all four corners and on
each side in the middle.
Do not over tighten.