Purple Ascent Adjustable Base - Connecting Cables and Power

17
If installing a King, see instructions on pages 19-24.
2
INSTALLATION GUIDE
Flip the base & connect the cables.
Uncoil the input cord (connected to
control box’s power port) and plug it
into the power supply.
Carefully ip the base over on to its
legs. Important: Two people are re-
quired to move the bed base. Do not
drag across the oor. Do not rest the
frame on its side as excessive pressure
may damage the legs.
Insert the power cord into the power
supply.
Plug the power cord into a power out-
let. A surge protector is recommended.
Surge protector not included.
•
•
•
•