18
3
Purple has partnered with Ergomotion
®
on this amazing product.
For technical or warranty support please contact Ergomotion
®
at
1-888-550-3746.
INSTALLATION GUIDE
Install mattress retainer bar and test
remote functions.
Place each end of the mattress retainer
bar into the inserts at the foot of the base
and rotate the bar so that it rests on the
edge of the base.
Once plugged into power, and after
putting AAA batteries into the remote,
press the head up and down buttons as
well as the foot up and down buttons
to verify proper setup and function.
Return the bed to a at position before
placing the mattress on top.
If remote does not move the bed, make
sure the bed is plugged in to power. If
it still doesn’t work, review the steps on
page 27 to pair the remote.
Setup is now complete!
•
•
•
To Next Page
Loading...