To Next PageTo Next Page
Need help?Do you have a question about the PurTest PT-8 and is the answer not in the manual?
General| Brand | PurTest |
|---|---|
| Model | PT-8 |
| Category | Water Filtration Systems |
| Language | English |
Avoid electric shock by keeping water away from electrical parts and unplugging unit.
Protect eyes and skin from UV light; never look directly at a lit UV lamp.
Replace UV lamp annually (9,000 hours) to maintain disinfection efficacy and prevent hazards.
UV units are designed for reducing/inactivating micro-organisms in water supplies.
Specifies maximum acceptable levels for Turbidity, Color, Manganese, Hardness, Iron, and pH before UV treatment.
Features a germicidal lamp in a quartz sleeve within a 304 Stainless Steel chamber.
Monitors UV lamp status, providing visual/audible alarms for lamp issues.
Key factors for proper installation including isolation, temperature, pressure, and sanitation.
Detailed steps for connecting the unit, mounting, and initial water flow.
Procedure for powering up the UV system and its diagnostic checks.
Explains LED indicators (Green, Yellow, Red) and audible alarms for system status.
Instructions for silencing audible alarms for different alarm conditions using the reset button.
Illustrates the water flow path through the UV system and related components.
Diagram labeling individual components of the UV system with item numbers.
Detailed steps for disinfecting new or serviced water systems using chlorine.
Quantities of household bleach required for disinfecting wells of various sizes.
Guidance on using sufficient chlorine, especially when well depth is uncertain.
Essential reminders for water supply safety: well location, contamination, and testing.
Method for sanitizing water lines when installing a UV disinfection system.
Steps for installing, cleaning, and replacing the quartz sleeve for optimal performance.
Guidelines for installing and maintaining UV lamps to ensure effective disinfection.
Details on electrical connections, grounding, GFI protection, and outlet requirements.
Diagram labeling individual components of the PT-8 model for identification.
Diagram labeling individual components of the PT-12 model for identification.
Diagram labeling individual components of the PT-20 model for identification.
Schematic showing electrical connections between the ballast, control box, and other components.
Guide listing common problems, their causes, and recommended corrections for the UV system.
Step-by-step guide for collecting sterile water samples for laboratory testing.
Comparison of specifications across PT-8, PT-12, and PT-20 models, including flow rate and dimensions.
Details the warranty duration for UV Chambers, Electrical Components, UV Lamp, and Quartz Sleeve.
Lists conditions and circumstances under which the warranty does not apply.
Instructions for returning products, including obtaining an RMA number and shipping address.
