mode starts automatically as the default setting.
3. Under the economy mode, press “ ” button once and the symbol will
illuminate, Comfort mode starts.
4. Under the Comfort mode press “ ” button, symbol will illuminate, Frost-free
mode starts.
Note：
If the screen displays and symbols or and symbols at the same
time this indicates that the heater is in heating status. After reaching the preset
temperature, the screen only display or symbol, the heater is in standby.
Setting the Temperature “ ” and” ” Buttons
1. The temperature setting range of the heater is 5
o
C to 50
o
C. In the comfort mode or
economy mode, use the “ ” or” ” button to select the desired indoor temperature.
2. Press the “ ” or” ” button the temperature figure will start to flash, now select
the temperature you need.
3. Once you have reached your desired temperature setting, press the " " button to
save the setting or wait for 10 seconds and the heater will automatically save the
temperature setting.
Note:
After the heater reaches the preset temperature, the screen will no longer show
symbol. The heater is in standby mode.
The preset temperature for frost-free mode is 5
o
C, in this mode, the default temperature
is not adjustable.
Setting the Time & Day
1. Press and hold the “ ” button for 3 seconds, around the border of the screen the
“day number” will flash. Press the “ ” and “ ” button to set current day.
Note: 1 is Monday, through to 7 which represents Sunday.
To Next Page
Loading...