Purus PUR2000PH-2 - Heater Operation; Control Panel Overview

Using your Heater
1. Place the heater on flat stable surface or mount to the wall as previously shown.
2. Make sure the power switch is in the off position.
3. Plug the heater in.
4. If the appliance is not going to be used for a long time, switch it off with power switch
and unplug the heater.
5. Attention! Do not cover the product when in use!
Operation Instruction
Control Panel
Fig. 6
Fig. 7
Switch/
Lock Button
- Button
Mode Button
+ Button
Program
Button