3. Connect Headphones or Speakers
Mantis has 2 Line Out ¼" TS jacks on the rear panel for connecting to a mixer,
amplifier or powered speakers.
It has a headphone ¼" TRS jack on the rear panel for connecting headphones.
We recommend you connect the synth in one of the above ways to hear it. Make sure the
Master Volume is first turned all the way down.
Note 1: Mantis may be LOUD depending on which patch is selected, i.e. some are louder
than others! Please be careful and turn up the Master Volume slowly.
Note 2: Please make sure your amp and speakers are turned down low when Mantis is
first switched on. Turn on the Mantis before turning on your speakers.
6
To Next Page
Loading...