Pyle Pro PCA1 - Troubleshooting Common Issues; No Power; No Sound; Amplifier Shut Down

TROUBLE SHOOTING
No power
No sound
The fuse might be blown.
Sound source or speakers
not connected properly.
MASTER volume control set
to minimum.
The speaker's wire might be
the wrong impedance.
The amplifier might has
shut down.
Check the amplifier's fuse
and replace it if necessary.
Check all connections.
Adjust the volume control
to desired setting.
Make sure all connected
speakers have the same
impedance rating.
Turn the amplifier off and
let it cool. Make sure the
amplifier is properly
ventilated, and then turn it
back on.