Pyle Pro PCA1 - Warranty and Specifications; Limited Warranty Details; Technical Specifications

Limited warranty
All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in
the USA are warranted to be free of defects in material and workmanship for one (1) year from the
date of purchase. This warranty is limited to the original retall purchaser of the amplifier.
Should the unitfall due to factory defects in material or workmanship,your unit well be repaired or
replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return Hotline at (718) 236-6948 to
obtain a Return Authorization Number.
This R.A # must appear on the outside of your package and on all paperwork relating to your
return.
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:
>> ® R.A.#:
= 2 = =
K © PYLE PYLE PRO Service Center
PRO 1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
@ A copy of your sales receipt or other proof of purchase
@ A brief letter, indicating the problem you are experiencing with the product
@ Include in your return address, daytime phone number and R.A. number
@ Also include a check or money order for $20.00 for return
shipping, handling and insurance, or provide your Visa/ MC
number with expiration date.
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage.-
SPECIFICATIONS
Output power, 2 channels driven
4-OHM,1 KHz, 1% THD. 3.0Wx2
4-OHM, 1 KHz, 10% THD. 2.2Wx2
Peak Power 5Wx2
Total Harmonic Distortion, 1 KHz Rated Power 0.3 %
Input Sensitivity, 1 KHz ,4-ohm Rated Power 150mV
Frequency Response 20Hz - 40KHz
Signal to Noise Ratio 75dB
Power Requirement 120V AC 60Hz
or 230V AC 50Hz
Dimensions 142.6x55x107mm (WxHxD)