Pyle PDA8BU - Front & Back Panel

ww w.PyleUSA.com
3
13. When grounding this unit, be sure to do so correctly, so as not to defeat the
built-in grounding in this unit.
14. Before placing, installing, rigging, or suspending any product, inspect all hardware,
suspension, cabinets, transducers, brackets and associated equipment for damage.
Any missing, corroded, deformed, or non-load rated component could signicantly
reduce the strength of the installation, placement or array. Any such condition
severely reduces the safety of the installation and should be immediately corrected.
Use only hardware which is rated for the loading conditions of the installation
and any possible short-term, unexpected overloading. Never exceed the rating
of the hardware or equipment.
15. Consult a licensed, professional engineer regarding physical equipment
installation. Ensure that all local, state and national regulations regarding the
safety and operation of equipment are understood and adhered to.
16. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Introduction
To get the most from the PDA8BU Multi-Channel Bluetooth Home Amplier,
it is recommended that you review all of the information provided in the instruction
manual before operating the equipment.
FRONT & BACK PANEL
1
2
3 4 5
6
7 8 9
13
14 15
10
16
17
11
12
18 19 20
21
22
23
24
25