Pyle PDWM4120 User Manual

www.PyleUSA.com
5
PDWM4122 Belt Pack
System Operation
1. Do not turn ON the transmitter before turning ON receiver. Turn the volume to
minimum level, then press the ON/OFF switch on receiver. The Receiver is ON.
2. Put the batteries correctly on the battery compartment, press ON/OFF switch
for 3 seconds, the transmitter is ON.
3. After turning on the transmitter, the RF indicator is lit, turn the volume to suitable
level.Then speak to the microphone, AF indicator is lit. If there is no sound and
the indicator is not lit, it means the system is working abnormally, please send it
to recondition.
4. The Frequency Selectable Button can adjust the transmitter with dierent
frequency. Press one to change the frequency. The receiver can match the
frequency automatically. Wireless Mic A, B, C, D has dierent frequency.
Transmitters do not interfere with each other. If you need sereval systems to
work at the same time, please adjust the transmitters with dierent frequency.
5. If you will not use it for a long time, please turn OFF the system and take out the
AA batteries.
6
1
2
3
4
5
1. Audio Jack
2. Volume Controll
3. RF antenna
4. Digital Display: Frequency,
Battery Volume, Channel
5. ON/OFF Switch: Press 3 seconds
6. Frequency Selectable button

Pyle PDWM4120 Specifications

General

Brand	Pyle
Model	PDWM4120
Category	Microphone system
Language	English