Pyle pldnv66b User Manual

Front Panel and Buttons
Button & Feature Layout
IR
IR remote receiver port
Eject ˄
Ejects disk from the front-loading tray
CD/DVD
Front-loading disc slot
Mic
Microphone port
Power/Home
Power ON/OFF the unit, also reverts you to the 'Home' screen user interface
Navi
Press to startup GPS Navigation Software
VOL-
Volume down
VOL+
Volume up
RST
Use a pin to insert into reset port to trigger unit reset. (Hold for 20 secs. to reset)
AUX
Input used to connect external devices via 3.5mm connection cable
USB
Connect flash memory to stream media or charge your handheld devices
Micro SD
(Left)
Use
ONLY
for the included micro SD card with pre-loaded GPS navigation map software
Micro SD
(Right)
Connect flash memory to stream media
*Please Note: the GPS Micro SD Card Slot (left) is to be USED FOR GPS PROGRAM SOFTWARE ONLY.
Turning Power On
1) Turn on the engine key to the “ACC” or “ON” position
2) Press and hold the power button for 3 seconds
-When the engine key is turned to the off position the unit is turned off
Status Bar (Along top of radio screen and app screen)
1) Home Icon – Switch between “app screen” and “radio interface”
2) Moon and star Icon – Turn off display (Awaken by tapping screen)
3) Time display
4) Current volume setting
5) Media status icons (Illuminate to show media is available)
Visit www.PyleAudio.com for additional and detailed model-specific information.
PyleAudio.com
5.

Pyle pldnv66b Specifications

General

Brand	Pyle
Model	pldnv66b
Category	Stereo Receiver
Language	English