EasyManuals Logo

Pyle PLMRA620 User Manual

Pyle PLMRA620
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
All Pyle products are carefully constructed and thoroughly tested before
shipment. Products purchased in the USA are warranted to be free of defects
in material and workmanship for two (2) years from the date of purchase. This
warranty is limited to the original retail purchase.
Should the product fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of Pyle.
To obtain warranty service you must first call our Consumer Return Hotline
number at (718) 236-6948 to obtain a Return Authorization number. This
R.A.# must appear on the outside of your package and on all paperwork
relating to your return.
When returning a product to us for warranty service it must be carefully packed
and shipped prepaid to:
You must also include the following items:
• A copy of your sales receipt or other proof of purchase
• A brief letter indicating the problem you are experiencing
• include in your letter your return address, daytime phone number,
and R.A. number
• also include a check or money order for $18.00 for return shipping,
handling, and insurance, or provide your Visa/MC number with
expiration date.
R.A.#
Pyle Service Center
1600 63rd Street
Brooklyn, NY 11204
Our obligation under this warranty is limited to the repair or
replacement of the defective unit when it is returned to us prepaid.
This warranty will be considered void if the unit was tampered with,
improperly serviced, or subject to misuse, neglect, or accidental
damage.
limited warranty policy
www.pyleaudio.com
amplifiers

Other manuals for Pyle PLMRA620

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pyle PLMRA620 and is the answer not in the manual?

Pyle PLMRA620 Specifications

General IconGeneral
Bass boost0 - 18 dB
Amplifier classD
Frequency range15 - 30000 Hz
RMS rated power2000 W
Input sensitivity250 mV
Built-in crossoverYes
Audio input channels5.1 channels
Peak power per channel500 W
Signal-to-Noise Ratio (SNR)95 dB
Total Harmonic Distortion (THD)0.04 %
RMS power output per channel (2 Ohm)400 W
RMS power output per channel (4 Ohm)250 W
Bridge-mode power output per channel (4 Ohm)900 W
XLR inNo
Audio (L/R) in3
Speaker selectorA+B
USB 2.0 ports quantity0
Speakers connectivity typeClamp terminals
PurposeCar
MaterialAluminum
Cooling typeActive
Product colorBlue, Silver
Volume controlDigital
Connectivity technologyWired
Maximum current60 A
DC input voltage12 V
Power protection featuresOverheating, Overload, Short circuit
LED indicatorsPower, Status
Weight and Dimensions IconWeight and Dimensions
Depth498 mm
Width276 mm
Height69.5 mm

Related product manuals