OPERATION
SWITCHING ON/OFF THE UNIT
Press PWR button (15) to turn on/off the
unit. When the unit is on. Press and hold it
for 2 seconds to turn off the unit.
SOUND ADJUSTMENT
Press SEL button (15) shortly to select
the desired adjustment mode. The
adjustment mode will change in the
following order:
BAS-TRE-BAL-FAD-EQ-BEEP-
LOUD-LOC-STEREO- VOL-
BAS: bass
TRE: treble
BAL: balance
FAD: fader
EQ：Equalization
BEEP: Beep sound
LOUD：loudness
LOC: local
VOL: volume
By rotating the audio knob (15), it is
possible to adjust the desired sound
quality.
EQ FUNCTION
In EQ item you can select the preset EQ
mode by rotating the audio knob (15) as
below:
FLAT--- POP--- ROCK---
CLASS ---EQ OFF
DISPLAY INFORMATION
Press 0/DISP button (13) to show the time
for several seconds. After several
seconds it will return to show the
information.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the AUX IN jack (9).
RESET FUNCTION
RESET button (14) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:
- Initial installation of the unit after all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (14), the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press /MODE button (16) to select
radio mode, the radio mode appears in
the display together with the memory
band and frequency.
SELECTING THE FREQUENCY
BAND
At radio mode, press /7/BAND
button (18) shortly to select the
desired band.
The reception band will change in the
following order:
→FM1→ FM2→ FM3 →AM1→AM2
SELECTING STATION
Press button (12) or button
(17) shortly to activate automatic seek
function. It will search up/down a
station automatically. Press for 2
seconds until “MANUAL” appears on
the display, the manual tuning mode is
selected. In this mode you can turn
up/down a step frequency one by one
till searched a station. If both buttons
have not been pressed for several
seconds, they will return to seek tuning
mode and “AUTO” appears on the
display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
To Next Page
Loading...
Need help?
General
Weight and Dimensions
