Pyle PMXAKB2000 User Manual (English)

Questions and Answers:

N
Nathaniel ThomasAug 4, 2025
How to troubleshoot no sound from my Pyle PMXAKB2000?
- J
  Joseph ReynoldsAug 4, 2025
  If there's no sound from your selected music source on the Pyle Amplifier, first, ensure the Input Selector is correctly set to the current playing source. Then, check that the Music Master Volume isn't set to the minimum; increase it to an appropriate level. Also, verify the Effect Loop bars are correctly inserted horizontally (L-OUT to L-IN and R-OUT to R-IN) and that any connected device is working correctly. Finally, inspect the speaker and speaker cable connections, tightening or replacing them if necessary. If the issue persists, the source player may be malfunctioning, consider replacing it and resetting the unit's power supply.
J
Justin ManningAug 11, 2025
What to do if there's no microphone output on my Pyle PMXAKB2000 Amplifier?
- M
  Mrs. Amber LopezAug 11, 2025
  If there is no microphone output on your Pyle Amplifier, check these things: 1. Ensure that the microphone is turned on. 2. Tighten or replace the microphone cable, if it's loose or not working. 3. Increase the Microphone Volume for the channel you are using. 4. Replace the microphone to make sure it is functioning correctly.
E
Eric RiversAug 19, 2025
Why is my Pyle PMXAKB2000 Amplifier microphone squealing?
- E
  Elizabeth HarperAug 19, 2025
  If you're experiencing high-pitched squealing when using the microphone with your Pyle Amplifier, it might be because the microphone is too close to the speakers; move it away. Alternatively, the treble levels on the microphone channel might be too high; try turning them down.
K
Kathleen RobertsAug 27, 2025
What to do if there are no graphics on the screen of my Pyle PMXAKB2000?
- L
  Lydia GreeneAug 27, 2025
  If there are no graphics on the screen when using your Pyle Amplifier, first, ensure the video cables are firmly connected to the correct video jacks. If that doesn't work, confirm that you're using a CDG disc for playback. Lastly, check that your TV or monitor is set to the correct video setting to accept the video signal.